Buy In Bulk3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H Tan, 18 in x 25 yd, 1 per case
SKU: 7000042749
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H Tan, 18 in x 25 yd, 1 per case
SKU: 7000042749
$567.35
Adding this item to your cart will qualify your order for 
Sold By: Roll
QTY:
SHIPPING DIMENSIONS
Height: 8.75 Inches
Width: 8.38 Inches
Length: 19.38 Inches
Weight: 9 Lb(s) 10 Oz
Product Benefits
- Plate demounts from the double coated cushioned tape without adhesive residue
- Tape also removes cleanly from the sleeve or steel print cylinder
- Flexographic printing, flexographic printers
- Cushioned flexographic plate mounting sticky back foam tape
- 0.020 inch (0.51 mm) double coated foam tape has the air release feature with a plate side adhesive technology designed to resist edge lifting on flexographic print plates
- Provides high quality process with halftone dots
- Tan foam color indicates the process printing density foam
- Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
- Has higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
- Print plates mounted on E1120H will have no air bubbles under the plate due to the air release feature designed into the tape
- Grooves in the adhesive are created by a cross-hatch pattern from the release liner
Unlike flat or pebbled liners, E-Series liners are crosshatched
Wide choice of adhesives, foams and thickness for the results customers demand.
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H is a tan foam tape that provides high quality process print. It has the air release feature that allows for bubble free mounting. This tape has excellent resistance to lifting on press allowing for clean plate removal.
Recommended Applications
- Mounting photopolymer plates to flexographic printing cylinders and sleeves
- Used in process printing
- 3M sticky back tapes are designed for wide-web presses to print film or paper for flexible packaging industry
Low density maximizes dot reproduction for high quality process work and screen printing
This cushion tape is manufactured for 20 mil applications. It is constructed with engineered acrylic adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting of photopolymer plates. The adhesive on the non-linered (sleeve/cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting.
On Easy with Reduced Air Entrapment
3M air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique micro-channels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting.
Keep the Presses Running and Customers Coming Back
For decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done.
Compare 3M™ Flexographic Plate Mounting Tapes (PDF, 662.63 Kb)
See More about 3M™ Flexographic Plate Mounting Systems (PDF, 5.0
RELATED PRODUCTS
3M™ Cloth Belt 341D, 3-1/2 in x 15-1/2 in, P120 grit, X-weight, 50 per case
SKU: 7010308386
$3.44
3M™ PSA Cloth Disc 348D, 8 in x NH, P120 grit, X-weight, 50 per inner, 250 per c…
SKU: 7010326519
$3.15
Scotch® Aluminum Foil Tape 3311 Silver, 2.83 in x 50 yd, 6 rolls per case
SKU: 7010313061
$29.90
