FE Construction for Edge Work, High Contact Pressure and Stock Removal
Featuring a more compact structure of non-woven fibers than Buff & Blend products, the Standard Abrasives™ Surface Conditioning FE Belt is engineered to provide high initial and extended rates of cut, while maintaining edge durability. Constructed of resin-reinforced, non-woven fiber, this belt is aggressive yet minimizes under-cutting or gouging of the workpiece. Within the Standard Abrasives™ line of surface conditioning belts, the FE belt performs the best on edges.

FE belts are made of a tough but flexible nylon mesh that fits any contoured surface. The FE material is designed with a woven fabric (scrim) embedded in the nylon structure to provide additional strength and durability. This helps extend the life of the belt and allows for extended use on ferrous materials or steel. This is the best surface conditioning material to use when high contact pressure and stock removal are required, and when loading is not a concern.

The Outstanding Performance of Surface Conditioning Material
Surface conditioning products have a non-woven construction in which fiber strands, resin, and abrasive mineral form a thick, open web or mesh. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow heat and swarf to escape, prolonging the performance of the abrasive. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance and extremely long service life.

Aluminum Oxide for Ferrous Metals and Composites
The fibers that make up this belt are overlaid with aluminum oxide abrasive. Aluminum oxide belts are a good match for operators who desire an all-purpose versatility and economy. The mineral cuts fast while blending and deburring and is a good choice for applications on ferrous metals and composites. FE belts feature a premium grain with higher fracture strength, meaning the mineral will fragment and renew more readily. They are available in grades of Very Fine (VFN), Medium (MED) and Coarse (CRS).

 

Recommended Applications
The Surface Conditioning FE Belt comes in many different widths and lengths for use on pneumatic sanders, portable belt sanders, backstand equipment, and floor mounted/platen sanders. Its thick coating of resin makes it ideal for material removal where loading is not an issue. Choose this belt for use on ferrous metals, stainless steel, and high nickel/chrome alloys to perform:

• Deburring: removing large and micro burrs, edge radiusi