The Ultimate Choice for Surface Preparation Hand Finishing
This thin, tough, sharp-cutting non-woven abrasive roll is ultra-flexible and conformable for cleaning or fine finishing. Scotch-Brite Multi-Flex Sheet is a good replacement for steel wool and eliminates contaminants.

The ultra-fine grade silicon carbide abrasive mineral is suitable for cleaning and finishing surfaces by hand in woodworking, metalworking, synthetics fabrication, and maintenance operations.

The three grades of Scotch-Brite™ Multi-Flex Sheet offer more aggressive, but not coarser, cutting and highly conformable finishing.

Most Aggressive — High Cut for Paint Prep and Wood
3M's most aggressive cutting grade is purple and is a highly conformable abrasive with high cut for paint preparation and wood finishes without dumping edges. It works great for scuffing new panels, door jambs and under bonnet areas. It is ideal for scuffing prior to primer and paint for proper mechanical adhesion, for tire clean-up and for cleaning grease, oil and rust from engine and other mechanical parts.

Less Aggressive — For Exceptional Finishes on Wood and Metal
The grey Multi-Flex Sheets are perfect for preparing color coat and simple blending and can be used with 3M™ Prep and Blend Liquid (09308) or degreaser. Use these, as well, for light scuffing of primer and paint.

Least Aggressive — For Cleaning and Fine Finishing
3M's least aggressive grade is copper and is used for water based paint systems and critical color blending. Use it for light scouring and with 3M™ Prep and Blend Liquid (09308) or degreaser.