3M™ Tape Primer 94, 4 gallons per case

-1

SKU: 7000001583

3M™ Tape Primer 94, 4 gallons per case

SKU: 7000001583

$237.36 / Bottle

Minimum Order Quantity: 4 Bottle

QTY:

SHIPPING DIMENSIONS Height: 9.00 Inches Width: 16.13 Inches Length: 19.38 Inches Weight: 32 Lb(s) 12 Oz

This product does not qualify for free shipping.

Technical Specifications

Can be applied with brush or swab for small areas and a pressurized flow gun for larger areas
Dries to a clear finish
Cleans up with isopropyl alcohol
Promotes adhesion to polyethylene, polypropylene, ABS, PET/PBT blends and other on difficult to stick to substrates
Commonly used for increasing adhesion of film and vinyl graphics in automotive detailing

More Product Details

Data Sheet

3M™ Tape Primer 94 is used to improve overall adhesion of tape, film and vinyl graphics

Dries in Minutes for Efficient Use
Make sure your surface is clean and dry before applying a thin, uniform coat of 3M™ Tape Primer 94. The primed surface must remain free from contaminants prior to applying the tape. It's important to use the minimum amount of product necessary as over applying can cause sub-optimal results. Allow the primer to dry completely, which is usually accomplished in 5 minutes at room temperature, before applying tape. Special note: porous surfaces may require 2 applications for uniform coverage and good adhesion. Allow your first application of primer to dry before applying a second coat.

Recommended Applications

Promote adhesion of 3M™ VHB™ Tape
For use on many plastic, rubber, painted and bare metal substrates

Application Tips
3M™ Tape Primer 94 may be applied with a brush, swab, pressurized flow gun, knurled roller or similar type of equipment and can be removed with isopropyl alcohol. Vigorous scrubbing may be required.