Free Shipping Click for more details

Lead times vary on all products. Most items ship within 5 business days. Call 800-521-8584 or email sales@ward-kennedy.com for more information.

Standard Abrasives™ Deburring Wheel 854293, 6 in x 2 in x 1 in, 9S FIN, 2 per case

SKU: 7010368579

Standard Abrasives™ Deburring Wheel 854293, 6 in x 2 in x 1 in, 9S FIN, 2 per case

SKU: 7010368579
$142.68 / Each
Add $199.00 worth of items to your cart to qualify for free shipping

Minimum Order Quantity: 2 Each
Estimated Lead Time (subject to change): 15 Days
QTY:
SHIPPING DIMENSIONS Height: 4.50 Inches Width: 6.63 Inches Length: 6.63 Inches Weight: 4 Lb(s) 0 Oz

Product Benefits

  • Open web is load resistant, prolonging abrasive service life
  • Conformable wheel to follow part geometry and reduce gouging
  • Great for removing medium to heavy burrs on parts with close tolerances, such as aluminum die cast flashing
  • Uses fine grade silicon carbide mineral for sharp cutting action and smooth finishes
  • Medium to hard density wheel stands up to edges
Standard Abrasives™ Deburring Wheel
Deburring wheels will not
break edges or remove metal
Recommended Applications
Standard Abrasives™ Deburring Wheel is a convolute wheel designed to remove medium and heavy burrs on a variety of substrates. Consider aluminum die cast flashing and various molds, which are often cast with close tolerances. The deburring wheel is hard and dense, so it can swiftly remove tiny, stubborn burrs on these precisely-shaped parts and stand up to edges. Yet, because the wheel has open web, it is flexible enough to respond to surface irregularities and still maintain part geometry. Now, removing medium to heavy burrs and parting lines from castings and forgings, and smoothing radii on stamped/formed metal parts becomes swift and efficient. The deburring wheel works tough without sacrificing the care and precision that is required for these applications.

Great Polishes and Blends
Offered in medium to hard densities and fine grade mineral, the Standard Abrasives™ Deburring Wheel balances strength with finesse. The wheel is filled with fine silicon carbide, which is a very sharp synthetic mineral commonly used for low-pressure applications. While it breaks down faster than aluminum oxide, silicon carbide produces a finer finish and cuts aggressively. As a result, the wheel is well equipped to polish workpieces, like welds and small casted parts, prior to coatings. It may also be good for blending and polishing marks and blemishes that result from handling marks on workpieces.
 
Now, removing medium to heavy burrs and parting lines from castings and forgings, and smoothing radii on stamped/formed metal parts becomes swift and efficient.
An excellent starting
point for medium to
heavy precision deburring,
blending and polishing,
especially where seams
and welds require
smoothing
Tips for Optimal Use
As a convolute wheel, the Standard Abrasives™ Deburring Wheel should run at recommended operating speeds, using low to medium pressure, and in the direction of the arrow imprinted on the wheel. Following these recommended measures will help to ensure operator safety and optimal performance of the wheel. Using lubricants may also help wash away unwanted swarf and debris and keep the abrasive running cool. The wheel may be used on straight shaft stationary and portable tools, feed-through machines and automated equipment. The versatile range of tools that the wheel may be used with gives operators an added level of flexibility and convenience, as they may manipulate the wheel to meet their unique project needs.

The open web on Standard Abrasives™ Deburring Wheel combines nonwoven fibers and silicon carbide mineral with resin. As the wheel abrades the surface, the fibers break down to expose fresh, sharp mineral for a consistent cut. Moreover, gaps between the fibers allow swarf to escape, so the web resists clogging with debris, prolonging abrasive servic

RELATED PRODUCTS

2" x 1/2" -120 Grit Dynacut A/O Square Pad X, 1/4-20
SKU: 78516
Add to Cart to See Price
3M™ Stikit™ Paper Disc Roll 763U, 5 in x NH, P120 grit, F-weight, 100 discs per …
SKU: 7010360060
$118.17
Standard Abrasives™ Buff and Blend Cross Buff HS 727402, 3 in x 3/4 in x 2 Ply x…
SKU: 7010310166
$8.02
Please enable JavaScript for Full Website Functionality